Tri Clover Biopharm
The Biopharm range also features
Tri-clover Biopharm. These products are available . The
outside surface of both is Ra=0.8. The inside surface is
mechanically polished with a Ra=0.5 finish; the
electro-polished inside surface finish is
Common features & benefit of the high clean and Biopharm
product lines are:
Available in dimension DIN, ISO 1127 and ASME BPE 1997
Prepared for orbital welding.
All ends protected by end-caps on delivery, to ensure
Edges for welding.
Delivered with traceability (High clean on request), 3.1.b.
certificate according to EN 10204 and ASTM A 450.
Bends, Tees & Reducers
Valfit constantly on producing
installation material with long durability, problem-free
welding and assembly, and highest possible strength. Key
criteria in the manufacturing process include tight
tolerance, a verity of finishes and uniform wall thickness.
Valfit is aware of the constantly increasing demands placed
upon the quality of welding. In accordance with these
demands, all our reducers meet the highest of standards.
The reducer have cylindrical welding ends and are available
for all tube combination, ensure that you will always get
the right diameter and wall thickness for your process.
Valfit ensures that all the angles are exact and that all
the tube, bend and tee connections are uniform. It is very
important that our costumer do not have to compensate for
any welding irregularities.
In order to ensure that you are able to select a finish that
exactly matches your process, Alfa Laval offers a wide range
of finishes, including matt, raw, bright and polished.
Internal surface are also produced to meet the strictest of
any application process demand.
Unions, Clamp Fittings & Flange
High Clean & Sanitary Fittings
Address : Valfit House, Plot No.38,
Indo Industrial Estate No.4, Navghar, Vasai (E),
Dist : Thane - 401210
Maharashtra INDIA Tel : (0250)2390419 Fax : (0250)2392577
Mobile : 9860562444 / 9860556401